By Jodi Summers
Santa Monica is in a technology conundrum.
Research shows that about 16 percent of new homes built in 2001 had structured wiring installed. That number is projected to increase 50 percent by 2005. What’s an existing household who lives in a 50-year-old structure to do, especially when everyone wants to be online at the same time? Upgrading to premium wiring means shredding a lot of drywall. Or, you can be cutting edge and set up a wireless-network route.
“Probably 25 million households have more than one PC in the house, and people want to leverage their broadband connection,” said Bill Kenney, vice president of emerging home solutions for Sears and chairman of the Internet Home Alliance.
Setting up a Wi-Fi network (that’s short for wireless fidelity) still isn’t seamless, but it’s getting easier. Coffeehouses and laundromats are becoming public wireless Web locales — soon you will be able to log on at McDonald’s, Starbucks and LAX.
GO WIRELESS ■The latest operating system is best for wireless networks — Windows XP or Apple’s OS X. If your system is more than three years old, consider upgrading to make your task easier. ■A wireless transmitter is the heart of your wireless network. It’s a small base station that connects to the Internet via a cable or DSL modem. It sends radio signals to the devices on the network, much the way a cordless phone base communicates with the handset.
There are two kinds of wireless transmitters: Routers and access points. If you are building a network from scratch, you’ll need a router. If you already have a wired home network but want the convenience of staying connected to the Web while you walk around the house, buy a wireless access point which plugs into your existing hardwired router. ■The right standard of equipment.
Stick with the latest standard — 802.11g — it’s five times faster, which means that you can network twice as many devices — computers, printers and digital equipment like audio receivers and TiVo. ■A wireless PC card or adapter for each computer. It’s necessary to pick up a signal from the hub transmitter. If you bought a laptop in the past year, it probably has a built-in wireless card. If your laptop is more than a year old, you may need a Wi-Fi PC card.
A desktop computer will need a Wi-Fi adapter, unless it happens to sit near the wireless router. If this is the case, connect the PC to the transmitter with an Ethernet cable.
SETTING UP THE NETWORK ■Find a central location because the signal for an 802.11g wireless device radiates in a circle about 150 feet wide, and the closer you sit to the hub, the better the connection. If you don’t already have a high-speed Web, have your modem installed at the location where you want to put your Wi-Fi router. ■Organize your network. You can plug your Internet connection into the base station, install the PC card into your laptop, turn everything on and in a perfect world, be magically connected to the Web. Of course, to begin, you will need to disable your personal firewall to allow your router and all the devices connected to the network to automatically recognize each other. Then you will need to set up a network log-on with your router’s IP address (it’s listed in the router manual) to access the router’s settings. Basic programming bugs out of the way, you can now configure your network access.
Finally, give each device connected to the network a name. Choose easy-to-remember names, like “Max’s work space” or “Diane’s desk” for the computers. To name digital equipment that doesn’t have a keyboard or other input device like a remote control, such as a digital audio receiver or TiVo, you will have to visit the manufacturer’s Web site. For example, TiVo subscribers should go to www.tivo.com to enter a name.
Activate the security software once your wireless system has been created. Welcome to the 21st century. (To reach Jodi Summers, , or call (310) 309-4219).
Originally published in the Santa Monica Daily Press print edition on February 11, 2004. Read the original PDF.